Large wall part of Seattle tunnel machine repairApril 3, 2014 @ 8:40 pm
SEATTLE (AP) -- It seems that everything connected with the effort to dig a highway tunnel under downtown Seattle is big -- from the tunneling machine that stopped working last December, to a large plywood wall planned to shield neighbors from the noise of repairing the machine.
Washington Transportation Department spokeswoman Laura Newborn said Thursday that the noise-blocking wall will be as tall as the lower deck of the Alaskan Way Viaduct. The wall will soon rise out of the ground near the spot where crews will dig a 120-foot-deep pit where they will work on the machine known as Bertha.
Newborn says the tunnel contractor, Seattle Tunnel Partners, is still finalizing a repair strategy. Plans so far call for the tunneling machine now located about 60 feet below ground to dig forward into the pit, so crews can partially disassemble Bertha and repair the seal system and main bearing.
The machine stopped working in early December about 1,000 feet into the 1.7-mile Highway 99 tunnel that will replace the viaduct.
Copyright © The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.
A family fights to get back Buddy after he was mistakenly adopted to someone else
50 Years Ago
A legendary DJ tells the story of The Beatles' first Seattle show
The SR 99 closure will cause big backups across Seattle for next 4 days
Please login below with your Facebook, Twitter, Google+ or Disqus account. Existing MyNorthwest account holders will need to create a new Disqus account or use one of the social logins provided below. Thank you.